Installation of Sunscreen Blinds: Is very straight forward and requires little expertise or tools.
You will need: Screws (16mm are fine) & an appropriate screwdriver.
Main Bracket Dimensions: 40mm wide x 60mm height
1. Take the two packaged brackets & separate them - Bracket 1 is always used at the same end as the control and Bracket 2 the same end as the metal 'nipple'.
Picture 1: Bracket 1 shown in full Picture 2: Bracket 2 shown in full
NB: Bracket colour will be appropriate for the colour of the blind.
2. Screw the appropriate bracket to each top corner ensuring they are set at equal distances from the front of the sill.
3. Ensure that the housing, containing the chain, is facing upward & then slot the blind onto Bracket 1. Once in place, slide the 'nipple' end into Bracket 2.
4. If you need to remove the blind from it's brackets: Turn your attention to the end with the metal nipple - next to it is a plastic cog which will turn in one direction. Turning the cog will retract the nipple and release the blind.
Return to product page>>
View Image Gallery>>
Ask a question or make an enquiry?>>